| Management number | 221349868 | Release Date | 2026/05/03 | List Price | US$75.20 | Model Number | 221349868 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
Manufacturer: Xiamen Zopin New Materials Limited Note: In stock. Customized electrode sheet , please contact Xiamen Zopin New Materials Limited Electrode sheet size: 10cm * 10cm;Packaging: 5 pcs/pack, vacuum packed Shelf life: Six months (vacuum sealed storage), used up within one month after opening Polar Plate Number: SY32XX Active material: Nickel cobalt manganese NCM811 (single crystal) Proportion of active substance: 94.5% Active material gram capacity (mAh/g): 188mAh/g (3.0-4.30V) Coating surface density (mg/cm2): 21.50 (tolerance+2.0%) Surface capacity (mAh/cm2): 3.82 Thickness of current collector (um): 12 (aluminum foil) Surface density of current collector (mg/cm2): 3.30 Compaction density (g/cc): 2.50-3.35 (compaction value not provided for roller pressed electrode, self calculated) Recommended electrolyte: KLD-1230C Can match all battery pole models (N/P ratio): None (if needed, please contact customization) Test conditions: Room temperature 25 ℃, 0.1/0.1C, 3.00-4.30V Test condition description: At room temperature of 25 ℃, let it stand for 4 hours, charge at a rate of 0.1C (constant current) to 4.30V, charge at a constant voltage of 4.30V to 0.02C, let it stand for 3 minutes, discharge at a rate of 0.1C (constant current) to 3.00V, and let it stand for 3 minutes Usage suggestion: 1. If the polarizer is not rolled, it is generally necessary to roll it before punching and baking (the compaction density can refer to the minimum value in the "Compaction Density" column of this table); 2. Baking conditions: Bake at 85-105 ℃ for 4 hours (if vacuum baking is required, air exchange is required twice): 3. The surface density should be determined based on the actual weighing results of each small disc
| Manufacturer | Xiamen Zopin New Materials Limited |
|---|
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form